Rust and etch.

So I had an interesting education at t "Car Quest" paint store in lexington. I learned all about it all, through the sassy words of a rather unhappy person behind the counter, but I got what I needed.


Step one after blasting was to put on an etch, since it it bare metal I had to get off all the rust and then the dust then put mulitple coats of etch on PK.



This is my makeshift spraybooth. Using an old shed in the back of the sculpture yard that I emptied out. I am spraying the inside with water before i use the spray equiptment as to knock back any dust or other particles.